Measured Vehicle Type
Land Rover Shenxing, 2008 model, VIN = SALFA24A98H0 *****, as shown in Figure 1.
Model nameplate, as shown in figure 2.
Measured steps
1. Use VIN to identify, read the correct vehicle type information, click "yes", as shown in figure 3;
2. The vehicle airbag is on trouble light and enters the restraint device control module. The fault code read is: U2100-00 the initial configuration is incomplete and the fault code cannot be cleared, as shown in figure 4;
3. Enter the special function and click "constraint construction mode", as shown in figure 5;
4. Select normal mode, as shown in Figure 6;
5. Click OK, as shown in figure 7;
6. The control module program is successfully completed, click "OK", as shown in figure 8;
7. Turn off the ignition switch and click OK, as shown in Figure 9;
8. Turn on the ignition switch and click OK, as shown in Figure 10;
9. Click yes to clear the fault code, as shown in Figure 11;
10. When the module enters the normal working mode, click OK. At this time, there is no fault code and the airbag trouble light is off, as shown in Figure 12.