For the appearance of a car, the tire standing is a very important proportion, especially if the hub part is scraped, the car will look inferior. However, when the wheel hub is running every day, there is always the possibility of being scratched by small stone. When the wheel hub is scratched, many people go to the auto repair factory or 4S shop, but their fees are too expensive. In fact, xiao Bian will teach you a few tricks today, and he can easily solve problems at home!
Step 1: Clean the hub
If you want to repair it, you must do a good job of cleaning. First, park your car in a place with ventilation and less dust. Prevent dust from falling while wiping. Many people may think that the next step of the editor is to let everyone get off the tire, which is completely unnecessary. You only need to use a professional car wash mop to dip car wash wax and clean the tire in a deep way. This is to facilitate us to see the depth and range of wheel hub scratches and facilitate the subsequent repair process. Of course, as long as the hub is not broken or deformed, it can be repaired.
Step 2: fill wheel hub scratches
After seeing the scratches clearly, the next repair work will begin. First of all, rub the scraping part back and forth with a fine waterproof abrasive paper, and perform a preliminary grinding until it is smooth. In this way, the scratches look much lighter. Then apply the hub putty (putty) evenly. If you want to improve more easily and pursue a more perfect effect, you can apply it several times. And when applying, the middle can be separated by a few minutes to ensure that the upper layer is Putty dry. Finally, use waterproof abrasive paper to polish the dried putty back and forth to make the wheel hub surface smooth.
Step 3: spray paint
The last step is painting. In order to avoid spraying other parts of the car during the painting process, you can use cardboard to do a basic protection work. In this way, the wheel hub spray will not touch the tire. The operation method is also very simple. Just aim the wheel hub spray at the putty applied in the previous step and gently spray back and forth. Until the surface is dry. After the above steps, the wheel hub is restored as new, and the naked eye can't see that it has been repaired at all!
